HVAC Services
Hot Water Tank Installation in Maple Ridge
Safe, Efficient & Reliable
At Centrum Solutions, we understand the importance of reliable hot water, especially during Maple Ridge’s colder months. Whether you’re replacing an old unit or installing a brand-new system, our professional team ensures a hassle-free installation, keeping your home warm and your water flowing.
Welcome to Centrum Solutions
Your Trusted HVAC Partner
Our Services
Hot Water Tank Repair
Hot Water Tank installation
Hot Water Tank Replacement
Hot Water Tank Maintenance
Step-by-Step Hot Water Tank Installation in Maple Ridge
01
Assessment & Consultation
Our first step is to conduct an in-depth consultation. We consider:
- The size of the tank you need based on the number of people in your household.
- Whether you want an electric or gas-powered system.
- Your typical water usage for showers, laundry, and daily tasks.
- The condition of your current unit, if you have one.
Based on this information, we’ll recommend the best type and size of hot water tank to suit your needs and budget.
02
Turning Off Utilities
Safety comes first. Before starting the installation, we’ll turn off all utilities:
- Water supply to avoid accidental leaks or flooding.
- Gas or electricity to prevent risks of electric shock or gas leaks.
03
Draining and Removing the Old Tank
If you’re replacing an old system, we carefully:
- Drain the old tank using a hose.
- Disconnect the power and water lines.
Safely remove and dispose of the old unit. We handle disposal responsibly, leaving no mess behind.
04
Preparing the Installation Area
We prepare the site by:
- Checking the floor’s stability and leveling to ensure proper support.
- Ensuring clearance around the tank for future maintenance.
- Verifying ventilation (for gas models) and proper drainage for overflow or pressure relief.
If any additional work is needed, such as pipe extensions or adding a drip pan, we take care of it.
05
Installing the New Hot Water Tank
Once the area is prepared, we:
- Position the new tank and ensure it’s perfectly level.
- Connect the cold water inlet and hot water outlet.
- For gas systems, we handle the gas line connections. For electric models, we ensure the electrical wiring is up to code.
- Install the temperature & pressure relief valves and set up the drain lines.
06
Filling the Tank and Testing Connections
After installation:
- We fill the tank with cold water and open the hot water taps throughout the house to bleed out air.
- We double-check all connections for leaks.
07
Turning On Power or Gas
For electric units, we power up the system. For gas models, we light the pilot and test the burners. We monitor the system until it reaches the desired temperature and confirm that the thermostat is functioning correctly.
08
Final Testing & Safety Checks
We perform thorough checks to ensure everything is working properly:
- Test the water temperature.
- Ensure the relief valve is functioning as it should.
- Test burner operation (for gas) or element performance (for electric).
- Check ventilation, drainage, and overall system safety.
09
Clean-Up & Walkthrough
We clean up the installation area and then provide a walkthrough of your new system:
- How to adjust the thermostat.
- How to spot potential issues early on.
- Maintenance tips to keep your hot water system in top shape.
What’s Included in Centrum Solutions’ Installation Service?
- Free consultation and water heater sizing.
- Professional removal and disposal of the old unit.
- Full code-compliant installation by licensed, insured professionals.
- A thorough inspection and customer walkthrough.
- Manufacturer warranty support.
- Optional maintenance packages for long-term care.
Optional Add-Ons for Your Hot Water Tank Installation
We also offer optional upgrades:
- Water leak sensors for added peace of mind.
- Expansion tanks (required in some areas with high water pressure).
- Timer systems for energy-saving schedules.
- Recirculation systems for instant hot water.
When to Replace vs. Repair Your Hot Water Tank
Consider replacing your tank if:
- It’s over 10–12 years old.
- The tank is leaking or has rusty water.
- It needs frequent repairs.
- You are running out of hot water too quickly.
We’ll inspect your current system and provide an honest recommendation on whether it should be replaced.
How Long Does Installation Take?
Most installations in Maple Ridge take 3 to 5 hours, depending on factors like:
- Type of tank (electric, gas, or hybrid).
- Location of the unit.
- Any necessary plumbing or venting upgrades.
Frequently Asked Questions (FAQs)
Yes, a permit is typically required for installation. Don’t worry—we handle all permits and inspections.
A family of 4 usually needs a 40–50 gallon tank. We’ll help you pick the right size based on your home’s water usage.
It’s not recommended to install it yourself. Improper installation can lead to water damage, gas leaks, and even code violations. Leave it to the professionals!
The cost depends on the type of tank and installation complexity. We always provide a transparent quote upfront before starting any work.
