HVAC Services
Hot Water Tank Replacement in Coquitlam
Fast, Professional, and Reliable
At Centrum Solutions, we know how essential a functioning hot water tank is for your daily life. Whether it's for a morning shower, doing laundry, or washing dishes, we make sure your hot water tank replacement in Coquitlam is handled quickly and efficiently. We understand that the climate in Coquitlam can lead to increased demand for hot water in colder months, so we provide prompt and reliable service to ensure you always have a steady supply of hot water.
Welcome to Centrum Solutions
Your Trusted HVAC Partner
Our Services
Hot Water Tank Repair
Hot Water Tank installation
Hot Water Tank Replacement
Hot Water Tank Maintenance
Step-by-Step Hot Water Tank Replacement in Coquitlam
01
Initial Consultation & Assessment
We start by assessing your current water heater and your home’s needs:
- What type of unit do you currently have (gas, electric, or hybrid)?
- What’s the size of your tank, and how much hot water does your household need?
- Where is the tank located, and does it comply with local building codes?
- Are there any safety concerns or plumbing issues we need to address?
After the assessment, we will help you choose the right tank size and model that suits your home’s needs, ensuring it will handle the hot water demand during Coquitlam’s cooler seasons.
02
Shutting Off Utilities
To ensure safety during the replacement process:
- We turn off the power (for electric models) or gas supply (for gas models)
- We also shut off the cold water supply to prevent any leaks or flooding while we work
03
Draining the Old Tank
Once all utilities are off, we carefully drain your old hot water tank:
- Using a hose, we remove all the water from the tank to avoid spills when removing the unit.
- If your tank is leaking or corroded, we take extra care to prevent any water damage to your home, especially if you’re dealing with older plumbing or flooring that might be more susceptible to water damage.
04
Disconnecting and Removing the Old Tank
After draining the tank, we:
- Disconnect the water lines, power sources, and venting (for gas models)
- Carefully remove the old tank from its location
- Properly dispose of the old unit, recycling it whenever possible
This ensures there’s no mess left behind and your space is ready for the new tank.
05
Preparing the Area for the New Tank
Before installing the new water heater, we prepare the area:
- Check that the floor is stable and level to support the new tank
- Ensure proper ventilation for gas units and check for safety clearances
- If necessary, we update any fittings, pipes, or install additional components like a drip pan or expansion tank (if required by local codes)
- Flush the water lines to ensure there is no buildup of minerals or rust, which could reduce the lifespan of the new unit
06
Installing the New Tank
Once everything is in place, we:
- Position the new water heater securely in place
- Connect the cold water inlet and hot water outlet lines
- Install the electrical connections (for electric tanks) or gas line (for gas models)
- Attach the temperature and pressure relief valve (TPR valve), and make sure the tank is properly supported and leveled
- Double-check everything to ensure the new tank is ready for use
07
Filling the Tank and Testing the System
After installation:
- We open the water supply to fill the tank
- We bleed the air from the system by running the hot water taps to ensure proper flow
- We check for leaks around the connections
- For gas tanks, we light the pilot and test the burner; for electric models, we power it up and test the thermostat
- We confirm that the water reaches the desired temperature and that the unit operates as expected
08
Final Safety Check and Walkthrough
Once the system is operational:
- We conduct a final safety inspection to ensure everything meets local codes and safety standards
- We review the warranty and user manual with you
- Walk you through the new tank’s settings and demonstrate how to adjust the thermostat
- Offer maintenance tips to ensure the longevity of the new tank
- Clean the area and leave your home looking spotless.
How Long Does a Hot Water Tank Replacement Take in Coquitlam?
Typically, replacing your hot water tank in Coquitlam takes between 3 to 4 hours, depending on factors like:
- The type of unit being installed (gas, electric, or hybrid)
- The condition of your plumbing and venting systems
- Any necessary code updates or adjustments required for your home
We’ll give you an accurate time estimate before we begin the job.
When Should You Replace Your Hot Water Tank?
If you’re unsure whether it’s time to replace your old tank, look out for these signs:
- The tank is over 10 years old
- Water runs out too quickly or you constantly run out of hot water
- Rusty or foul-smelling water
- Strange sounds like rumbling or popping from the tank
- Leaking around the base of the tank
- Higher energy bills
- Frequent breakdowns or costly repairs
We’ll inspect your tank and offer an honest recommendation—if it can be repaired, we’ll let you know.
What’s Included in Centrum Solutions' Hot Water Tank Replacement Service?
- Free consultation and written estimate
- Safe removal and disposal of the old tank
- Full installation of the new water heater
- System testing, safety checks, and final inspection
- Warranty paperwork and user manual
- Code-compliant, licensed, and insured work
Why Choose Centrum Solutions for Hot Water Tank Replacement in Coquitlam?
- Certified, experienced technicians
- 24/7 emergency availability
- Transparent pricing—no hidden fees
- We clean up the work area, leaving your home spotless
- Friendly, no-pressure consultations
- We service all makes and models of water heaters
Ready for a New Water Heater?
In most cases, hot water tank installations take 3 to 5 hours. Factors such as tank type (electric, gas), unit l
Don’t let a broken water heater disrupt your daily routine. Get the fast, reliable service you need for hot water tank replacement in Coquitlam. We offer same-day or next-day service to get your hot water back as soon as possible.
ocation, and necessary plumbing updates can influence the time.
Frequently Asked Questions (FAQs)
If your tank is over 10 years old, shows signs of rust, leaks, or no longer provides consistent hot water, it’s likely time for a replacement.
Most replacements are completed within half a day, typically 3 to 5 hours, including the removal of the old unit and installation of the new one.
Yes. Many homeowners in Coquitlam are switching to high-efficiency models or tankless systems to save on energy bills and reduce environmental impact.
Yes, a plumbing permit is generally required. Licensed installers will manage the permitting process and ensure compliance with local regulations.
Energy-efficient models may qualify for rebates through programs like FortisBC. Ask your installer for help accessing available incentives.
