HVAC Services
Hot Water Tank Maintenance in Port Coquitlam
Keep Your System Running Efficiently
Port Coquitlam, with its beautiful natural scenery and a mix of urban and suburban living, experiences diverse weather patterns—from chilly, rainy winters to warm summers. In a climate like this, ensuring your hot water tank is properly maintained is vital to ensure comfort throughout the year. Centrum Solutions offers expert hot water tank maintenance in Port Coquitlam, helping you prevent costly repairs, reduce energy bills, and extend the life of your system.
Welcome to Centrum Solutions
Your Trusted HVAC Partner
Our Services
Hot Water Tank Repair
Hot Water Tank installation
Hot Water Tank Replacement
Hot Water Tank Maintenance
Step-by-Step Hot Water Tank Maintenance
01
Turn Off Power or Gas Supply
Before starting the maintenance, we ensure safety by:
- Turning off the circuit breaker for electric models.
- Shutting off the gas supply valve for gas units.
This prevents any electrical or gas hazards during maintenance.
02
Turn Off the Cold Water Supply
We close the cold water supply valve to prevent any new water from entering while we work on the system. This step ensures that the tank is isolated and safe to service.
03
Inspect the Tank for Leaks or Rust
We carefully inspect the tank for any signs of wear, such as:
- Leaks or corrosion, especially at the base of the tank
- Rust around the tank and the connections
- Potential issues with pipes or connections
In Port Coquitlam, where the region experiences moisture during rainy seasons, it’s essential to check for rust or leaks that may worsen during the colder months.
04
Flush the Tank (Drain Sediment)
Sediment buildup is a common problem in areas with hard water, and Port Coquitlam is no exception. To prevent it from reducing efficiency, we:
- Attach a hose to the tank’s drain valve
- Open the valve and allow water and sediment to drain
- Continue flushing until the water runs clear
- Close the valve and remove the hose
Flushing the tank helps maintain its efficiency and prevents clogging, which is crucial for your system’s health.
05
Check the Anode Rod (Anti-Rust Rod)
The anode rod prevents corrosion by attracting minerals that could damage the inside of the tank. We:
- Remove and inspect the anode rod for any signs of wear or corrosion
- Replace the rod if it’s too deteriorated (typically every 3–5 years)
By replacing a worn-out anode rod, you can double the life of your water heater and prevent costly rust damage.
06
Test the Pressure Relief Valve (TPR Valve)
The pressure relief valve ensures your tank doesn’t over-pressurize, which could lead to dangerous situations. We:
- Lift the valve tab to release a small amount of water
- Check that the valve opens and closes properly
- Replace it if it’s stuck or leaking
Proper maintenance of the pressure relief valve ensures the safety of your water heater system.
07
Check the Thermostat & Heating Elements
We test the thermostat settings to ensure they’re correct and check the heating elements (in electric tanks) for proper operation:
- Ensure the thermostat is set to the ideal temperature (120°F or 49°C)
- Test the heating elements to make sure they’re heating efficiently
Proper temperature settings and functional heating elements ensure faster heating and lower energy consumption.
08
Inspect Venting & Combustion (Gas Models Only)
For gas-powered water heaters, we:
- Check the venting for any blockages or leaks
- Inspect the burner assembly for soot or rust buildup
- Test the pilot light to ensure it’s burning blue (indicating proper combustion)
Ensuring proper venting and combustion is critical for safe operation, especially during the colder months when your system is used more frequently.
09
Refill the Tank and Restore Power/Gas
Once all maintenance tasks are completed, we:
- Close the drain valve
- Turn on the cold water supply and allow the tank to fill
- Open a hot tap to release any air trapped in the system
- Restore power or gas to the unit and test it
This step ensures that the system is fully functional and ready to provide hot water when you need it.
10
Final Safety Check & Report
After all maintenance work is complete, we:
- Listen for any unusual sounds or signs of malfunction
- Inspect all valves, connections, and parts for any leaks or issues
- Provide you with a maintenance report and offer tips to help extend the life of your hot water tank
Our final check ensures that your hot water system is in optimal working condition.
What’s Included in Centrum’s Maintenance Service?
- Comprehensive inspection of the tank, valves, and connections
- Sediment flushing and tank cleaning
- Anode rod and pressure valve inspection
- Burner and heating element testing
- Thermostat calibration and temperature setting
- Safe restart and performance check
- Maintenance report and longevity tips
Why Regular Maintenance is Important
- Cleaner, healthier water
- Faster hot water recovery
- Lower energy consumption and reduced bills
- Fewer breakdowns and costly repairs
- Safer operation of your water heater
- Increased lifespan of your hot water tank (up to 15 years)
Regular maintenance is essential, especially in Port Coquitlam, where the area experiences both humid weather and colder temperatures during the winter. This can put additional stress on your water heater, making proper care even more important.
Book Your Hot Water Tank Maintenance Today!
Ensure your water heater continues to perform at its best.
Frequently Asked Questions (FAQs)
We recommend at least once a year, particularly in Port Coquitlam, where environmental factors like moisture can affect the tank’s efficiency. Homes with hard water may require more frequent maintenance.
Over time, sediment buildup can reduce efficiency, cause overheating, and even damage your tank. Regular flushing prevents this buildup and keeps your system running smoothly.
We will check the condition of the anode rod during our inspection. If it’s corroded, we’ll replace it. Anode rods typically need replacing every 3–5 years to prevent rust buildup inside your tank.
