HVAC Services
Hot Water Tank Maintenance in Pitt Meadows
Reliable, Efficient, and Long-Lasting Service
In Pitt Meadows, where the community enjoys a mix of serene rural landscapes and close proximity to the city, maintaining your hot water tank is essential for comfort, especially during those chilly winter months. Whether you have a gas, electric, or hybrid water heater, keeping it in good condition ensures you’ll always have reliable hot water for your home. Centrum Solutions offers expert hot water tank maintenance services in Pitt Meadows to help you get the most out of your system and avoid unexpected breakdowns.
Welcome to Centrum Solutions
Your Trusted HVAC Partner
Our Services
Hot Water Tank Repair
Hot Water Tank installation
Hot Water Tank Replacement
Hot Water Tank Maintenance
Step-by-Step Hot Water Tank Maintenance
01
Turn Off Power or Gas Supply
Before we begin, safety is our first priority:
- For electric units, we shut off the circuit breaker to ensure no electrical accidents occur.
- For gas models, we turn off the gas valve to prevent any potential hazards during maintenance.
02
Turn Off the Cold Water Supply
Next, we close the cold water supply valve to prevent fresh water from entering the tank while we’re working.
03
Inspect the Tank for Leaks or Rust
In Pitt Meadows, where the humidity levels can fluctuate, we conduct a thorough inspection of your tank:
- Check the base of the tank and surrounding areas for any leaks, rust, or corrosion
- Inspect the pipes and connections to ensure there’s no wear or stress
- Ensure the tank’s overall integrity is intact to avoid future leaks
04
Flush the Tank (Drain Sediment)
If your home is in an area with hard water, like many parts of Pitt Meadows, sediment can build up inside the tank and affect its performance. We:
- Attach a hose to the tank’s drain valve
- Open the valve and allow water and sediment to drain
- Keep flushing until the water runs clear
- Close the valve and remove the hose
Flushing your water heater helps improve efficiency and prevents overheating or clogging that can result from sediment accumulation.
05
Check the Anode Rod (Anti-Rust Rod)
To prevent rust from forming inside your tank, we check the anode rod, which attracts minerals that would otherwise corrode the tank’s lining. We:
- Remove the anode rod and inspect it for signs of corrosion
- Replace it if it’s heavily worn (typically every 3–5 years)
A healthy anode rod can extend your tank’s lifespan and protect it from rust, ensuring long-term reliability.
06
Test the Pressure Relief Valve (TPR Valve)
The pressure relief valve is a critical safety feature that prevents the tank from over-pressurizing. We:
- Test the valve by lifting the tab to release water
- Ensure it opens and closes properly
- Replace it if it’s stuck or leaking
Testing this valve is essential to maintain safety and prevent potential hazards.
07
Check the Thermostat & Heating Elements
We ensure your water heater is heating efficiently by checking:
- The thermostat setting (ideal temperature is 120°F or 49°C) to avoid excessive energy use
- The function of the heating elements (for electric models)
- Whether the thermostat is calibrated correctly and maintaining consistent temperatures
Proper thermostat settings and functional heating elements help reduce energy consumption and provide consistent hot water.
08
Inspect Venting & Combustion (Gas Models Only)
If you have a gas water heater, we inspect the following:
- Check the vent pipe for blockages or leaks
- Inspect the burner assembly for signs of rust, soot, or other issues
- Test the pilot light and flame color to ensure proper combustion (a healthy flame is blue)
This inspection ensures that your gas water heater operates safely and efficiently
09
Refill the Tank and Restore Power/Gas
After completing the necessary checks and maintenance, we:
- Close the drain valve
- Turn the cold water supply back on and allow the tank to fill
- Open a hot tap to release any trapped air
- Restore the power or gas supply and test the system to make sure everything works properly
10
Final Safety Check & Report
To ensure everything is functioning as it should, we:
- Listen for unusual sounds
- Check for small leaks or issues
- Review the work we’ve done with you
- Provide tips for maintaining your system and improving its efficiency
What’s Included in Centrum’s Maintenance Service?
- Full inspection of the tank, valves, and connections
- Sediment flushing and tank cleaning
- Anode rod and pressure valve check
- Burner or heating element inspection
- Thermostat calibration and temperature setting
- Safe restart and performance check
- Detailed maintenance report and tips for longevity
Why Regular Maintenance is Important
- Cleaner water and better water quality
- Faster heating and reduced energy consumption
- Lower utility bills
- Reduced risk of breakdowns and costly repairs
- Longer lifespan for your water heater
Maintaining your hot water tank ensures that your system is operating at its peak efficiency, so you don’t have to deal with the hassle of sudden repairs or replacements.
How do I know if the anode rod needs replacing?
You might notice rusty water, or we’ll identify the problem during our inspection. We suggest replacing the anode rod every 3–5 years to protect your tank.
Frequently Asked Questions (FAQs)
We recommend professional maintenance at least once a year, especially in Pitt Meadows where the water quality can impact your system. If you have hard water or a larger household, more frequent maintenance may be necessary.
Over time, sediment will build up inside the tank, reducing efficiency, clogging lines, and potentially causing damage. Flushing your tank regularly prevents these issues.
You might notice rusty water, or we’ll identify the problem during our inspection. We suggest replacing the anode rod every 3–5 years to protect your tank.
