HVAC Services
Hot Water Tank Maintenance in Coquitlam
Ensuring Comfort and Efficiency Year-Round
Coquitlam’s temperate climate, with wet, chilly winters and warm summers, means your hot water tank works hard to keep up with varying demands. Proper maintenance is crucial to ensure it’s operating safely and efficiently, helping you avoid surprise breakdowns and costly repairs. Centrum Solutions offers expert hot water tank maintenance services in Coquitlam, providing the care your system needs to stay in top shape for years to come.
Welcome to Centrum Solutions
Your Trusted HVAC Partner
Our Services
Hot Water Tank Repair
Hot Water Tank installation
Hot Water Tank Replacement
Hot Water Tank Maintenance
Step-by-Step Hot Water Tank Maintenance
01
Turn Off Power or Gas Supply
Safety is our priority. Before starting any maintenance work, we ensure:
- The power to electric tanks is turned off by switching off the breaker.
- The gas supply is shut off for gas-powered units.
This step prevents accidents or damage while we’re working on the system.
02
Turn Off the Cold Water Supply
To stop fresh water from entering the tank while we’re performing maintenance, we close the cold water supply valve. This isolates the tank and ensures the work is done without any interruptions.
03
Inspect the Tank for Leaks or Rust
Coquitlam’s humid climate can sometimes contribute to corrosion, especially at the base of the tank or around connections. We:
- Inspect the tank for any rust, corrosion, or water damage
- Check the pipes and connections for leaks or wear
Our thorough inspection helps catch small issues before they turn into costly problems.
04
Flush the Tank (Drain Sediment)
Over time, sediment builds up inside your tank, especially in areas with hard water, which can be common in Coquitlam. To prevent this:
- We attach a hose to the drain valve and open it to let water and sediment flow out
- We continue draining until the water runs clear
- Close the valve and remove the hose
This flushing process prevents inefficiencies caused by sediment buildup and extends the life of your water heater.
05
Check the Anode Rod (Anti-Rust Rod)
The anode rod is crucial for preventing the tank from rusting. We:
- Inspect the anode rod for any signs of wear or corrosion
- Replace the rod if it’s heavily corroded (we recommend replacing it every 3–5 years)
Keeping the anode rod in good condition can add years to the life of your water heater, even in Coquitlam’s humid conditions.
06
Test the Pressure Relief Valve (TPR Valve)
The pressure relief valve ensures that the tank doesn’t over-pressurize, preventing dangerous situations. We:
- Lift the valve tab to release a small amount of water
- Ensure that it opens and closes properly
- Replace it if there’s any issue with the valve
This is a critical safety feature, especially when the tank is under frequent use during the colder months.
07
Check the Thermostat & Heating Elements
We make sure your system is heating water efficiently by:
- Checking the thermostat settings (ideal is 120°F or 49°C)
- Ensuring the thermostat is working properly
- Testing the heating elements (for electric models) to ensure they’re functioning properly
This ensures faster heating and optimal energy efficiency, which is especially helpful in winter when hot water demand is higher.
08
Inspect Venting & Combustion (Gas Models Only)
For gas-powered water heaters, we:
- Check the vent pipe for any blockages or leaks
- Inspect the burner for rust or soot buildup
- Test the pilot light to ensure it’s burning a healthy blue flame
Proper venting and combustion ensure the safety and efficiency of your gas water heater, especially when the temperature fluctuates in Coquitlam’s seasonal changes.
09
Refill the Tank and Restore Power/Gas
Once maintenance is complete:
- We close the drain valve and open the cold water supply to refill the tank
- We bleed air from the system by turning on a hot tap
- We restore power or gas to the unit and test its operation
This step ensures your tank is fully functional and safe to use.
10
Final Safety Check & Report
After completing the maintenance, we:
- Listen for any unusual sounds or leaks
- Check every connection and valve for leaks or issues
- Provide a detailed maintenance report and offer tips on how to care for your system
We’ll leave you with peace of mind knowing that your system is in excellent shape.
What’s Included in Centrum’s Maintenance Service?
- Full inspection of the tank, connections, and valves
- Sediment flushing and tank cleaning
- Anode rod inspection and replacement
- Pressure relief valve check
- Thermostat and heating element testing
- Burner and venting inspection (for gas models)
- System restart and performance check
- Detailed maintenance report with tips for tank longevity
Why Choose Centrum Solutions?
- Experienced, licensed technicians
- 24/7 availability for emergencies
- Transparent pricing with no hidden fees
- Clean, respectful service every time
- Locally trusted in Coquitlam
- Comprehensive maintenance plans to meet your needs
Frequently Asked Questions (FAQs)
We recommend at least one maintenance visit per year, especially in Coquitlam’s climate where seasonal changes can affect your system. If you have hard water, you might need more frequent service.
Sediment buildup reduces your tank’s efficiency, makes it harder to heat water, and can lead to overheating. Flushing the tank regularly helps prevent these issues.
The anode rod should be replaced if it’s corroded or worn out. We’ll inspect it during our maintenance visit and replace it if necessary.
