HVAC Services
Hot Water Tank Installation in Burnaby
Reliable, Efficient & Safe
At Centrum Solutions, we understand how essential a reliable hot water system is in Burnaby, especially with our cool winters and rainy seasons. Whether you’re installing a new hot water tank or replacing an old one, our team of experts ensures a smooth and hassle-free process, making sure your home stays warm and comfortable.
Welcome to Centrum Solutions
Your Trusted HVAC Partner
Our Services
Hot Water Tank Repair
Hot Water Tank installation
Hot Water Tank Replacement
Hot Water Tank Maintenance
Step-by-Step Hot Water Tank Installation in Burnaby
01
Assessment & Consultation
The process begins with a thorough assessment of your home’s needs. Our experts ask the right questions to determine:
- What size tank will work best for your household?
- Should you opt for electric or gas heating?
- How much water do you typically use in a day (showers, dishes, laundry, etc.)?
- Is your current system still functional, or is it time for a replacement?
Once we understand your needs, we help you choose the right type of water heater—whether it’s electric, gas, or hybrid—ensuring it suits your home’s usage and Burnaby’s wet climate.
02
Turning Off Utilities
Safety is our top priority. Before starting the installation, we shut off all utilities:
- Water supply to prevent any accidental leaks.
- Electricity or gas supply to avoid any risk of shocks or gas leaks.
03
Draining and Removing the Old Tank
If we’re replacing your old unit:
- We carefully drain the old tank using a hose.
- Disconnect all power and water lines.
- Remove the old tank and dispose of it safely and properly, ensuring no mess is left behind.
04
Preparing the Installation Area
We prepare the installation site by checking:
- The floor’s stability and ensuring it’s level.
- Clearance around the tank to allow for future maintenance.
- Proper ventilation (important for gas models).
- Drainage for the pressure relief valve to prevent water overflow.
- If any adjustments are needed (like adding a drip pan or extending pipes), we handle it before proceeding.
05
Installing the New Tank
With everything in place, we begin the installation:
- We carefully position the new hot water tank and ensure it’s level.
- Connect the cold water inlet and hot water outlet.
- For gas models, we install and connect gas lines. For electric models, we ensure the electrical wiring is up to code.
- Install temperature & pressure relief valves and connect the drain lines as per code.
06
Filling the Tank and Testing
Once the tank is in place:
- We fill the tank with cold water.
- Open hot water taps around the house to bleed out air from the system.
- Check all connections for leaks.
07
Turning On Power or Gas
After filling the tank:
- For electric units, we power them up.
- For gas units, we light the pilot and check the burners.
- We wait for the system to reach the desired temperature and ensure the thermostat is functioning properly.
08
Final Testing & Safety Checks
To ensure everything runs smoothly:
- We test the water temperature.
- Confirm that the relief valve is working.
- Test burner/elements for gas and electric units.
- Ensure all ventilation and drainage is functioning correctly.
- Check the overall performance and noise levels.
09
Clean-Up & Walkthrough
After the installation:
- We clean the entire area, leaving no mess behind.
- We’ll walk you through the operation of your new water heater, show you how to adjust the thermostat, and give you maintenance tips to ensure its longevity.
What’s Included in Centrum’s Installation Service?
- Free consultation to determine the best water heater for your home.
- Professional removal of your old unit and disposal.
- Full code-compliant installation.
- Licensed, insured technicians ensuring safety and quality.
- A thorough inspection and walkthrough before we finish.
- Manufacturer warranty support.
Optional Add-Ons for Your Hot Water Tank
If desired, we can also install:
- Water leak sensors for peace of mind.
- Expansion tanks (especially useful in areas with high water pressure).
- Timer systems to save on energy costs.
- Recirculation systems for instant hot water.
When to Replace vs. Repair Your Hot Water Tank
You should consider replacing your hot water tank if:
- It’s over 10-12 years old.
- The tank is leaking.
- It frequently needs repairs.
- The water is rusty or has a bad smell.
- You’re running out of hot water too quickly.
We’ll inspect your system first and give you an honest recommendation on whether replacement is necessary.
How Long Does Installation Take?
Most installations in Burnaby take 3 to 5 hours, depending on the following factors:
- The type of tank you’ve chosen (gas, electric, or hybrid).
- The location of your current tank.
- Any plumbing or venting updates needed.
Frequently Asked Questions (FAQs)
Yes, permits are required in Burnaby for most installations. We’ll handle all the paperwork, so you don’t have to worry about it.
A family of 4 typically needs a 40–50 gallon tank. We’ll help you pick the right size based on your home’s needs.
DIY installations are not recommended. Improper installation can lead to gas leaks, water damage, or even code violations. It’s always best to hire a professional for your safety.
Costs vary depending on the type of tank and the complexity of the installation. We’ll provide a transparent upfront price before starting any work.
