HVAC Services
Hot Water Tank Maintenance in Burnaby
Keep Your System Efficient and Long-Lasting
Living in Burnaby, with its mix of urban and residential landscapes and proximity to the coast, can take a toll on your home’s hot water system. With the occasional cold snaps in the winter and the mild, rainy climate throughout the year, ensuring that your hot water tank is properly maintained is crucial. At Centrum Solutions, we provide comprehensive hot water tank maintenance services in Burnaby, helping you keep your water heater running smoothly, efficiently, and for many years to come.
Welcome to Centrum Solutions
Your Trusted HVAC Partner
Our Services
Hot Water Tank Repair
Hot Water Tank installation
Hot Water Tank Replacement
Hot Water Tank Maintenance
Step-by-Step Hot Water Tank Maintenance
01
Turn Off Power or Gas Supply
Before starting, safety is our top priority:
- For electric tanks, we cut the power by turning off the circuit breaker.
- For gas tanks, we turn off the gas supply to prevent any accidents while we work.
02
Turn Off the Cold Water Supply
To ensure no water enters the tank during the maintenance process, we close the cold water valve. This ensures no disruption as we service the system.
03
Inspect the Tank for Leaks or Rust
In Burnaby, with its cool, wet climate, tanks are prone to corrosion and rust. We thoroughly inspect:
- The base of the tank for leaks and corrosion
- The condition of pipes and connections for signs of wear or stress
- The overall structural integrity of your tank
04
Flush the Tank (Drain Sediment)
Over time, sediment builds up inside the tank, especially in areas like Burnaby, where hard water can be more common. This buildup can reduce efficiency and cause damage. We:
- Attach a hose to the tank’s drain valve
- Flush out sediment until the water runs clear
- Close the valve and remove the hose after cleaning
Flushing the tank is essential to preventing overheating and blockages that can result from sediment accumulation.
05
Check the Anode Rod (Anti-Rust Rod)
The anode rod helps prevent rust from forming inside your tank by attracting the minerals that would otherwise corrode the interior lining. We:
- Remove and inspect the anode rod for corrosion
- Replace it if necessary, ensuring the rod is in good condition (typically replaced every 3-5 years)
By keeping the anode rod in good shape, you can significantly extend your tank’s lifespan, even in areas with high humidity like Burnaby.
06
Test the Pressure Relief Valve (TPR Valve)
The pressure relief valve is a vital safety feature that prevents the tank from over-pressurizing. We:
- Lift the tab to release water and check the valve’s operation
- Ensure the valve opens and closes properly and replace it if it’s faulty
07
Check the Thermostat & Heating Elements
Proper temperature and heating are essential for both energy efficiency and comfort. We check:
- That the thermostat is correctly set (ideally 120°F or 49°C) to avoid excessive energy use or burns
- The functionality of heating elements for electric tanks to ensure they are working optimally
08
Inspect Venting & Combustion (Gas Tanks Only)
For gas water heaters, we:
- Inspect the vent pipe to ensure there are no blockages or leaks
- Check the burner assembly for signs of rust or soot
- Test the pilot light and ensure the flame is blue, which indicates proper combustion
Proper venting and safe combustion are especially important for homes in Burnaby where heavy rainfall and humidity can sometimes affect the system’s performance.
09
Refill the Tank and Restore Power/Gas
After all maintenance tasks are complete, we:
- Close the drain valve and reopen the cold water supply
- Allow the tank to refill and remove air from the system by opening a hot water tap
- Turn the power or gas back on and test the unit to ensure everything is working properly
10
Final Safety Check & Report
Before finishing the service, we:
- Perform a final check for leaks and unusual sounds
- Review the work completed and provide you with a quick report card on your tank’s condition
- Offer valuable tips for maintaining your system between professional services
What’s Included in Centrum’s Maintenance Service?
Full inspection of the tank, valves, and connections
- Sediment flushing and tank cleaning
- Anode rod and pressure valve check
- Burner or heating element inspection
- Thermostat test and temperature setting adjustment
- Safe system restart and performance check
- Friendly advice for extending your tank’s lifespan
Why Regular Maintenance Matters
- Cleaner, fresher water
- Faster heating times and reduced energy use
- Lower utility bills
- A safer system with fewer risks of leaks or damage
- A longer-lasting hot water heater
By scheduling routine maintenance, you can avoid unexpected cold showers or costly repairs, ensuring a reliable hot water supply year-round.
Frequently Asked Questions (FAQs)
We recommend a yearly maintenance service, but if you live in Burnaby’s hard water zones or have a large household, more frequent maintenance may be necessary.
Sediment buildup can significantly reduce the tank’s efficiency, causing it to overheat, get clogged, or even suffer long-term damage.
