HVAC Services
Hot Water Tank Maintenance in Surrey
Keep Your System Efficient and Reliable
Surrey, with its mix of urban and rural landscapes, is a vibrant city that experiences a range of weather conditions—from warm summer days to cold, wet winters. In such a climate, having a reliable hot water system is essential for comfort throughout the year. Regular maintenance of your hot water tank is crucial to ensure its longevity, energy efficiency, and optimal performance. Centrum Solutions offers top-notch hot water tank maintenance services in Surrey, ensuring your system runs smoothly no matter the season.
Welcome to Centrum Solutions
Your Trusted HVAC Partner
Our Services
Hot Water Tank Repair
Hot Water Tank installation
Hot Water Tank Replacement
Hot Water Tank Maintenance
Step-by-Step Hot Water Tank Maintenance
01
Turn Off Power or Gas Supply
The first step is to ensure that it’s safe to work on the tank:
- For electric models, we turn off the circuit breaker.
- For gas units, we shut off the gas supply valve.
This prevents any risk of electrical or gas-related accidents during the maintenance process.
02
Turn Off the Cold Water Supply
We close the cold water supply valve to stop water from entering the tank while we perform maintenance, ensuring a safe and controlled process.
03
Inspect the Tank for Leaks or Rust
We conduct a full visual inspection to check for:
- Leaks or corrosion, particularly at the base of the tank
- Rust or damage around the tank and connections
- Signs of wear on the pipes and connections
In Surrey, where winters can bring increased humidity, rust and corrosion are common issues to check for, especially in older systems.
04
Flush the Tank (Drain Sediment)
Over time, sediment from hard water can build up in your tank, leading to inefficiency and potential damage. Here’s how we address it:
- Attach a hose to the tank’s drain valve
- Open the valve to let water and sediment flow out
- Continue flushing until the water runs clear
- Close the valve and remove the hose
This process is essential for homes in Surrey, where mineral buildup can reduce your system’s efficiency and lead to costly repairs.
05
Check the Anode Rod (Anti-Rust Rod)
The anode rod prevents the tank from rusting by attracting minerals that would otherwise corrode the inside. We:
- Remove and inspect the anode rod for wear
- Replace it if it’s too corroded (recommended every 3–5 years)
A healthy anode rod helps extend the lifespan of your tank, especially important for households in Surrey that may have water with higher mineral content.
06
Test the Pressure Relief Valve (TPR Valve)
The pressure relief valve is a safety feature designed to prevent the tank from over-pressurizing. We:
- Lift the valve tab to release water
- Ensure the valve opens and closes properly
- Replace it if it’s stuck or leaking
This is a critical step in maintaining your water heater’s safety and preventing hazardous situations.
07
Check the Thermostat & Heating Elements
To make sure your system is heating water efficiently, we:
- Check the thermostat settings (ideal is 120°F or 49°C)
- Test the heating elements (for electric models)
- Make sure the thermostat is working correctly
Proper thermostat settings and functioning heating elements help you save on energy bills while ensuring hot water when you need it.
08
Inspect Venting & Combustion (Gas Models Only)
If you have a gas water heater, we inspect the following:
- The vent pipe for blockages or leaks
- The burner assembly for signs of rust or soot
- The pilot light and flame color to ensure a healthy blue flame
Proper venting and combustion are essential to prevent carbon monoxide issues and ensure the safe operation of your gas water heater.
09
Refill the Tank and Restore Power/Gas
After completing the necessary maintenance tasks, we:
- Close the drain valve
- Turn the cold water supply back on and allow the tank to fill
- Open a hot tap to release trapped air
- Restore power or gas to the unit and test it
This final step ensures that your water heater is operating properly and is ready for use.
09
Final Safety Check & Report
After everything is back in working order, we:
- Listen for any unusual sounds or leaks
- Inspect all connections and valves
- Provide a maintenance report and offer tips for extending the life of your system
What’s Included in Centrum’s Maintenance Service?
- Full inspection of the tank, valves, and connections
- Sediment flushing and tank cleaning
- Anode rod and pressure valve check
- Burner or heating element inspection
- Thermostat calibration and temperature setting
- Safe restart and performance check
- Maintenance report and tips for system longevity
Why Regular Maintenance is Important
- Cleaner water and improved quality
- Faster heating and reduced energy usage
- Lower utility bills
- Fewer repairs and breakdowns
- Safer system operation
- Longer lifespan (up to 15 years)
In Surrey’s varying climate, maintaining your hot water system is essential to ensure your home stays comfortable year-round.
FAQs About Hot Water Heater Maintenance
We recommend annual maintenance, particularly in Surrey where the water quality and environmental factors can impact your system. If you have hard water or a larger household, bi-annual maintenance may be beneficial.
Sediment can accumulate, reducing your water heater’s efficiency and potentially causing damage. Flushing your tank regularly prevents this and ensures optimal performance.
You may notice rusty water, or we will spot the issue during our inspection. Typically, anode rods should be replaced every 3–5 years.
